← Ferramentas 📦

Caixinha Empilhável Parede

Empilháveis para parede · Boxes.py local

⇓ SVG ⇓ DXF
Encaixe (Finger Joint)
Estilo dos dentes
Espaço nas extremidades
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
space below holes of FingerHoleEdge (multiples of thickness)
extra material to grind away burn marks (multiples of thickness)
Largura dos dentes
Folga para encaixe
Espaço entre dentes
width of finger holes (multiples of thickness)
for plain WallEdges
space below holes of FingerHoleEdge (multiples of thickness)
for SlatWallEdges
"spring", "stud" or "none"
horizontal width of the hook
horizontal space to the hook
height of the horizontal bar of the hook
height of the hook top to bottom
vertical spacing of slots middle to middle (in mm)
space below holes of FingerHoleEdge (multiples of thickness)
space surrounding connectors (multiples of thickness)
for DinRailEdges
"stud" or "none"
horizontal width of the hook
space below holes of FingerHoleEdge (multiples of thickness)
for FrenchCleatEdges
angle of the cut (0 for horizontal)
"stud" to brace against the wall, "hook" for attaching to a second cleat or "none" for just straight
horizontal width of the hook in mm
distance of the cleats in mm (for bottom hook)
space below holes of FingerHoleEdge (multiples of thickness)
for SkadisEdges
Thickness of the Skandis board
How to hook into the wall
Empilhável
inside angle of the feet
height of strips to be glued to the inside of bottom edges (multiples of thickness)
height of the feet (multiples of thickness)
distance from finger holes to bottom edge (multiples of thickness)
width of the feet (multiples of thickness)
Type of wall system to attach to
Usar medidas externas
sections left to right in mm 🛈
Altura interna
Profundidade interna
fraction of bin height covered with slope
angle of the bottom slope
include a label area on the front
fraction of bin height covered with label (if label is enabled)
Configurações Padrão
Espessura do material
Compensação de queima/kerf
label the parts (where available)
Estilo cantos internos
Espaçamento entre peças
⇓ Baixar SVG ⇓ Baixar DXF
⚙ Gerando peças...
📦 Configure os parâmetros e clique em Gerar
para ver as peças para corte laser.