← Ferramentas šŸ“¦

Caixa Trapezoidal

TrapĆ©zio com cantos arredondados Ā· Boxes.py local

⇓ SVG ⇓ DXF
Encaixe (Finger Joint)
Estilo dos dentes
EspaƧo nas extremidades
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
space below holes of FingerHoleEdge (multiples of thickness)
extra material to grind away burn marks (multiples of thickness)
Largura dos dentes
Folga para encaixe
EspaƧo entre dentes
width of finger holes (multiples of thickness)
Dove Tail Joints
how much should fingers widen (-80 to 80)
how far the dove tails stick out of/into the edge (multiples of thickness)
radius used on all four corners (multiples of thickness)
from one middle of a dove tail to another (multiples of thickness)
Flex Cut
Hint of how much the flex part should be shortened
width of the gaps in the cuts (multiples of thickness)
width of the pattern perpendicular to the cuts (multiples of thickness)
width of the pattern in direction of the cuts (multiples of thickness)
RoundedTrapezoidBox
Profundidade interna
Altura interna
Usar medidas externas
front width (assuming radius == zero) in mm
back width (assuming radius == zero) in mm
radius of front left corner in mm
radius of front right corner in mm
radius of back_right corner in mm
radius of back left corner in mm
number of pieces for outer wall
Estilo do topo
ConfiguraƧƵes PadrĆ£o
Espessura do material
CompensaĆ§Ć£o de queima/kerf
label the parts (where available)
Estilo cantos internos
EspaƧamento entre peƧas
⇓ Baixar SVG ⇓ Baixar DXF
⚙ Gerando peças...
šŸ“¦ Configure os parâmetros e clique em Gerar
para ver as peças para corte laser.