← Ferramentas 🖼️

Porta-Retrato

3 camadas — fácil trocar foto · Boxes.py local

⇓ SVG ⇓ DXF
Montagem
head diameter of mounting screw (in mm)
shaft diameter of mounting screw (in mm)
minimum space left and right without holes (fraction of the edge length)
number of mounting holes (integer)
side of box (not all valid configurations make sense...)
edge style
Dove Tail Joints
how much should fingers widen (-80 to 80)
how far the dove tails stick out of/into the edge (multiples of thickness)
radius used on all four corners (multiples of thickness)
from one middle of a dove tail to another (multiples of thickness)
PhotoFrame
Width of the photo, not including any border
Height of the photo, not including any border
Use golden ratio to calculate matting width
Width of the matting border around the sides of the photo
Width of the matting border around top/bottom of the photo
Matting overlap of the photo, e.g. 2mm if photo has border, 5mm if not
Width of the pre-cut glass or acrylic
Height of the pre-cut glass or acrylic
Width of the frame border around the matting
Clearance in the guide pocket to help slide the matting/glass in
Frame overlap to hold the matting/glass in place
Split front into thin rectangles to save material
Configurações Padrão
Espessura do material
Compensação de queima/kerf
label the parts (where available)
Estilo cantos internos
Espaçamento entre peças
⇓ Baixar SVG ⇓ Baixar DXF
⚙ Gerando peças...
🖼️ Configure os parâmetros e clique em Gerar
para ver as peças para corte laser.