← Ferramentas šŸ’”

Abajur / Luz Noturna

Compartimento para LED Ā· Boxes.py local

⇓ SVG ⇓ DXF
Encaixe (Finger Joint)
Estilo dos dentes
EspaƧo nas extremidades
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
space below holes of FingerHoleEdge (multiples of thickness)
extra material to grind away burn marks (multiples of thickness)
Largura dos dentes
Folga para encaixe
EspaƧo entre dentes
width of finger holes (multiples of thickness)
EmpilhƔvel
inside angle of the feet
height of strips to be glued to the inside of bottom edges (multiples of thickness)
height of the feet (multiples of thickness)
distance from finger holes to bottom edge (multiples of thickness)
width of the feet (multiples of thickness)
DobradiƧa
have lid overlap at the sides (similar to OutSetEdge)
set to lower value to get disks surrounding the pins
diameter of the pin hole (multiples of thickness)
fixed length of the grips on he lids (multiples of thickness)
thickness of the arc holding the pin in place (multiples of thickness)
Night lightbox diffuser plate lock to prevent unwanted access to the electronics
Diameter of the background acrylic diffuser plate locking screw hole in mm
Length of the background acrylic diffuser plate locking screw in mm
Thickness of the background acrylic diffuser plate locking nut in mm
Width of the background acrylic diffuser plate locking nut in mm
NightLightBox
style of the front lock
width of the window in the front panel in mm
height of the window in the front panel in mm
Number of decorative wood plates
Thickness of the wood plates in mm
Thickness of the background acrylic diffuser plate in mm
Depth of the background zone for the electronics and LEDs in mm
Space between the decorative plates in mm
add hooks to decorative plates (allowing one sides plates)
Margin for moving parts in mm
ConfiguraƧƵes PadrĆ£o
Espessura do material
CompensaĆ§Ć£o de queima/kerf
label the parts (where available)
Estilo cantos internos
EspaƧamento entre peƧas
⇓ Baixar SVG ⇓ Baixar DXF
⚙ Gerando peças...
šŸ’” Configure os parâmetros e clique em Gerar
para ver as peças para corte laser.