← Ferramentas
š”
Matrix WS2812b
Enclosure para LEDs WS2812b Ā· Boxes.py local
▶ Gerar
⇓ SVG
⇓ DXF
Encaixe (Finger Joint)
Estilo do encaixe
rectangular
springs
barbs
snap
Estilo dos dentes
EspaƧo nas extremidades
EspaƧo nas extremidades
LƔbio inferior
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
Largura da borda
space below holes of FingerHoleEdge (multiples of thickness)
Comprimento extra
extra material to grind away burn marks (multiples of thickness)
Largura do dente
Largura dos dentes
Folga do encaixe
Folga para encaixe
EspaƧo entre dentes
EspaƧo entre dentes
Largura do furo
width of finger holes (multiples of thickness)
Matrix
Led width
Width of the LED matrix in pixels
Led height
Height of the LED matrix in pixels
Physical led x
Width (X) of the LED matrix PCB in mm
Physical led y
Height (Y) of the LED matrix PCB in mm
Matrix back frame border
Border of the back frame bo keep the pcb in blace but allow for air flow and cable management
Matrix front frame border offset
Offset of the front frame to allow for the plexiglass to be attached
Distance between leds
Distance of the color dividers. Make sure your machine is able to cut thin structures.
Altura H (mm)
Height of the matrix
Height pcb
Height of the pcb including the highest non led components in mm
Plexiglass thicknes
Thickness of the plexiglass in mm
Mounting holes
Add mounting holes for the enclosure
Mounting hole diameter
Diameter of the mounting holes in mm
Matrix count x
Number of modules in x direction
Matrix count y
Number of modules in y direction
ConfiguraƧƵes PadrĆ£o
Espessura do material (mm)
Espessura do material
Kerf / Burn (mm)
CompensaĆ§Ć£o de queima/kerf
RĆ³tulos
label the parts (where available)
Cantos internos
loop
corner
backarc
Estilo cantos internos
EspaƧamento (mm)
EspaƧamento entre peƧas
▶ Gerar peƧas
⇓ Baixar SVG
⇓ Baixar DXF
⚙ Gerando peças...
š”
Configure os parâmetros e clique em
Gerar
para ver as peças para corte laser.