← Ferramentas
⌨️
Teclado / Keypad
Enclosure para teclado personalizado · Boxes.py local
▶ Gerar
⇓ SVG
⇓ DXF
Encaixe (Finger Joint)
Estilo do encaixe
rectangular
springs
barbs
snap
Estilo dos dentes
Espaço nas extremidades
Espaço nas extremidades
Lábio inferior
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
Largura da borda
space below holes of FingerHoleEdge (multiples of thickness)
Comprimento extra
extra material to grind away burn marks (multiples of thickness)
Largura do dente
Largura dos dentes
Folga do encaixe
Folga para encaixe
Espaço entre dentes
Espaço entre dentes
Largura do furo
width of finger holes (multiples of thickness)
Keypad
Altura H (mm)
height of the box
Top1 thickness
thickness of the button hold layer, cherry like switches need 1.5mm or smaller to snap in
Top2 enable
enables another top layer that can hold CPG151101S11 hotswap sockets
Top2 thickness
thickness of the hotplug layer, CPG151101S11 hotswap sockets need 1.2mm to 1.5mm
Pcb mount enable
adds holes for pcb mount switches
Led enable
adds pin holes under switches for leds
Diode enable
adds pin holes under switches for diodes
Cutout type
Shape of the plate cutout: 'castle' allows for modding, and 'simple' is a tighter and simpler square
Columns definition
Each column is separated by '/', and is in the form 'nb_rows @ offset x repeat_count'. Nb_rows is the number of rows for
Configurações Padrão
Espessura do material (mm)
Espessura do material
Kerf / Burn (mm)
Compensação de queima/kerf
Rótulos
label the parts (where available)
Cantos internos
loop
corner
backarc
Estilo cantos internos
Espaçamento (mm)
Espaçamento entre peças
▶ Gerar peças
⇓ Baixar SVG
⇓ Baixar DXF
⚙ Gerando peças...
⌨️
Configure os parâmetros e clique em
Gerar
para ver as peças para corte laser.