← Ferramentas
šØ
Estojo para Hobby
Case por cĆ©lulas personalizĆ”veis Ā· Boxes.py local
▶ Gerar
⇓ SVG
⇓ DXF
Encaixe (Finger Joint)
Estilo do encaixe
rectangular
springs
barbs
snap
Estilo dos dentes
EspaƧo nas extremidades
EspaƧo nas extremidades
LƔbio inferior
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
Largura da borda
space below holes of FingerHoleEdge (multiples of thickness)
Comprimento extra
extra material to grind away burn marks (multiples of thickness)
Largura do dente
Largura dos dentes
Folga do encaixe
Folga para encaixe
EspaƧo entre dentes
EspaƧo entre dentes
Largura do furo
width of finger holes (multiples of thickness)
EmpilhƔvel
Angle
inside angle of the feet
Bottom stabilizers
height of strips to be glued to the inside of bottom edges (multiples of thickness)
Altura (mm)
height of the feet (multiples of thickness)
Holedistance
distance from finger holes to bottom edge (multiples of thickness)
Largura
width of the feet (multiples of thickness)
HobbyCase
Unit d
Depth of single unit
Unit h
Height of single unit
Unit w
Widths of unit columns, eg. 215*3 or 150:215:150
Linhas
Number of rows in each of the columns
Shelves n
How many shelves should each column have eg. 2:3:2. Use integers only!
Add rails
Should rails be generated for slots unpopulated by shelves?
Add cover
Should cover for the case be generated?
Inset shelves
Should the inner dividers and shelves be inset from the front edge?
ConfiguraƧƵes PadrĆ£o
Espessura do material (mm)
Espessura do material
Kerf / Burn (mm)
CompensaĆ§Ć£o de queima/kerf
RĆ³tulos
label the parts (where available)
Cantos internos
loop
corner
backarc
Estilo cantos internos
EspaƧamento (mm)
EspaƧamento entre peƧas
▶ Gerar peƧas
⇓ Baixar SVG
⇓ Baixar DXF
⚙ Gerando peças...
šØ
Configure os parâmetros e clique em
Gerar
para ver as peças para corte laser.