← Ferramentas
📦
Engradado
Engradado aberto com máscara · Boxes.py local
▶ Gerar
⇓ SVG
⇓ DXF
Encaixe (Finger Joint)
Estilo do encaixe
rectangular
springs
barbs
snap
Estilo dos dentes
Espaço nas extremidades
Espaço nas extremidades
Lábio inferior
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
Largura da borda
space below holes of FingerHoleEdge (multiples of thickness)
Comprimento extra
extra material to grind away burn marks (multiples of thickness)
Largura do dente
Largura dos dentes
Folga do encaixe
Folga para encaixe
Espaço entre dentes
Espaço entre dentes
Largura do furo
width of finger holes (multiples of thickness)
Empilhável
Angle
inside angle of the feet
Bottom stabilizers
height of strips to be glued to the inside of bottom edges (multiples of thickness)
Altura (mm)
height of the feet (multiples of thickness)
Holedistance
distance from finger holes to bottom edge (multiples of thickness)
Largura
width of the feet (multiples of thickness)
Crate
Largura X (mm)
Largura interna
Profundidade Y (mm)
Profundidade interna
Altura H (mm)
Altura interna
Handleoffset
offset of the handle hole from top edge
Handlewidth
width of the handle hole
Handleheight
Altura da alça
Handleradius
handle hole radius
Makestackable
make crates stackable
Addpatternmask
add pattern mask
Configurações Padrão
Espessura do material (mm)
Espessura do material
Kerf / Burn (mm)
Compensação de queima/kerf
Rótulos
label the parts (where available)
Cantos internos
loop
corner
backarc
Estilo cantos internos
Espaçamento (mm)
Espaçamento entre peças
▶ Gerar peças
⇓ Baixar SVG
⇓ Baixar DXF
⚙ Gerando peças...
📦
Configure os parâmetros e clique em
Gerar
para ver as peças para corte laser.