← Ferramentas
š
Porta-Pilhas / Latas
Para pilhas AA ou latas Ā· Boxes.py local
▶ Gerar
⇓ SVG
⇓ DXF
Encaixe (Finger Joint)
Estilo do encaixe
rectangular
springs
barbs
snap
Estilo dos dentes
EspaƧo nas extremidades
EspaƧo nas extremidades
LƔbio inferior
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
Largura da borda
space below holes of FingerHoleEdge (multiples of thickness)
Comprimento extra
extra material to grind away burn marks (multiples of thickness)
Largura do dente
Largura dos dentes
Folga do encaixe
Folga para encaixe
EspaƧo entre dentes
EspaƧo entre dentes
Largura do furo
width of finger holes (multiples of thickness)
EmpilhƔvel
Angle
inside angle of the feet
Bottom stabilizers
height of strips to be glued to the inside of bottom edges (multiples of thickness)
Altura (mm)
height of the feet (multiples of thickness)
Holedistance
distance from finger holes to bottom edge (multiples of thickness)
Largura
width of the feet (multiples of thickness)
for Hole filling
Fillholes bar length
maximum length of bars
Fillholes fill pattern
no fill
hex
square
random
hbar
vbar
style of hole pattern
Fillholes hole max radius
maximum radius of generated holes (in mm)
Fillholes hole min radius
minimum radius of generated holes (in mm)
Fillholes hole style
round
triangle
square
hexagon
octagon
style of holes (does not apply to fill patterns 'vbar' and 'hbar')
Fillholes max random
maximum number of random holes
Fillholes space between holes
hole to hole spacing (in mm)
Fillholes space to border
hole to border spacing (in mm)
CanStorage
Top edge
e Straight Edge
f Finger Joint
h Edge (parallel Finger Joint Holes)
Å Stackable edge with finger holes (top)
edge type for top edge
Borda inferior
e Straight Edge
E Straight Edge (outset by thickness)
Å” Stackable feet (bottom)
edge type for bottom edge
Candiameter
outer diameter of the cans to be stored (in mm)
Canheight
height of the cans to be stored (in mm)
Cannum
number of cans to be stored
Chuteangle
slope angle of the chutes
ConfiguraƧƵes PadrĆ£o
Espessura do material (mm)
Espessura do material
Kerf / Burn (mm)
CompensaĆ§Ć£o de queima/kerf
RĆ³tulos
label the parts (where available)
Cantos internos
loop
corner
backarc
Estilo cantos internos
EspaƧamento (mm)
EspaƧamento entre peƧas
▶ Gerar peƧas
⇓ Baixar SVG
⇓ Baixar DXF
⚙ Gerando peças...
š
Configure os parâmetros e clique em
Gerar
para ver as peças para corte laser.